{"id":3570,"date":"2026-10-29T17:29:47","date_gmt":"2026-10-29T09:29:47","guid":{"rendered":"http:\/\/www.lightingbora.com\/blog\/?p=3570"},"modified":"2026-10-29T17:29:47","modified_gmt":"2026-10-29T09:29:47","slug":"how-to-use-cad-software-to-design-sheet-metal-parts-40dd-bd0f2e","status":"publish","type":"post","link":"http:\/\/www.lightingbora.com\/blog\/2026\/10\/29\/how-to-use-cad-software-to-design-sheet-metal-parts-40dd-bd0f2e\/","title":{"rendered":"How to use CAD software to design sheet metal parts?"},"content":{"rendered":"

Hey guys, if you\u2019re in the sheet metal game, you know a good design can make or break a part\u2019s quality, cost, and turnaround. As a sheet metal supplier for years, I\u2019ve seen so many projects derail because folks skip the CAD basics or go overboard with fancy features that don\u2019t matter for metal. Today, I\u2019m breaking down how we use CAD every single day to design parts that don\u2019t just look right, but fit, function, and get produced without headaches. Let\u2019s keep this real\u2014no boring jargon, just what works for our shop and our clients. Sheet Metal Parts<\/a><\/p>\n

<\/p>\n

First off, let\u2019s get one thing straight: sheet metal CAD isn\u2019t the same as regular 3D modeling. When we design for metal, every decision ties back to material, thickness, and how it\u2019s going to be cut, bent, and finished. I used to see clients throw a generic 3D part at us, and half the time it\u2019s impossible to bend without cracking, or has sharp edges that aren\u2019t code-compliant. So step one for us? Nail the material specs before we even open the CAD tool. Let\u2019s say we\u2019re working with 14 gauge cold rolled steel (CRS)\u2014super common for enclosures and brackets. That thickness doesn\u2019t work the same as 6061 aluminum for aircraft parts, or stainless for food equipment. When we start a new design, we input the exact material and thickness into our CAD template first. That way, bend deductions, flat patterns, and even hole placements auto-adjust, instead of us calculating math manually (trust me, I\u2019ve messed up bend deductions more times than I care to admit\u2014CAD saves that headache).<\/p>\n

Speaking of bend deductions\u2014this is non-negotiable. A lot of new designers skip this, and their parts end up 1\/8\u201d too big or too small. Bend deduction is the amount of material that gets compressed and stretched when you bend metal, right? For each bend, it depends on thickness, bend radius, and the material type. Our CAD software (we use Fusion 360, by the way\u2014it\u2019s free for small shops like ours, no need for that crazy expensive SolidWorks license if you\u2019re just starting out) has pre-programmed bend deduction tables for most common materials. But we always double-check them with test bends first. Last month, a client sent a design with a 90-degree bend in 16 gauge stainless\u2014their CAD had a standard deduction, but because their bend radius was tighter than usual, the part was off. We adjusted the deduction in CAD, fixed the flat pattern, and saved them from ordering 500 wrong parts. That\u2019s the kind of thing that makes us go-to supplier, not a random shop.<\/p>\n

Next up: flat patterns. This is where CAD shines, because if your flat pattern is wrong, your laser cutter or press brake is gonna waste time and material. A lot of designers think they can just extrude a 3D shape and export the flat, but no\u2014for sheet metal, you have to make sure the flat pattern is associative. That means if you change a bend radius or the length of a side in 3D, the flat pattern updates automatically. No redrawing, no guesswork. When we get a client\u2019s CAD file, the first thing our tech team checks is whether the flat pattern is linked to the 3D model. If it\u2019s not, we fix it before we even quote the part. We once had a client who sent a design with a separate flat pattern, not associative\u2014they\u2019d changed a hole location in 3D, and the flat pattern was still showing the old hole, so their CNC punch was drilling the wrong spots. That cost them $2k in scrap, and we fixed their design for free. Lesson learned: always use associative flat patterns.<\/p>\n

Hole and slot placement is another area where CAD saves us hours. You can\u2019t just put a hole anywhere in sheet metal\u2014there\u2019s a minimum distance from the edge of the part to the hole (that\u2019s called the edge distance) and between holes, to avoid cracking when bending. For example, in 14 gauge CRS, the minimum edge distance for a 1\/4\u201d hole is about 3\/16\u201d. If you put a hole too close to a bend, the metal will crack when you fold it. Our CAD has built-in checks for this\u2014when we place a hole, it will flag if it\u2019s too close to an edge or a bend. We also use auto-hole patterns for repeat parts, like if you have a bracket with four identical holes, CAD will let you copy them without messing up the spacing. Oh, and slots\u2014same rule, but the edge distance for a slot is a little different. CAD will calculate that for us, so we don\u2019t have to pull out a ruler every time. We once had a new employee who tried to design a slot too close to a bend; CAD flagged it, so we caught it before cutting a single piece. Saved us a new set of tooling for the press brake.<\/p>\n

Bend lines and notches\u2014don\u2019t ignore these. Bend lines are where the press brake will fold, so you have to make sure they\u2019re placed correctly, not overlapping with holes or edges. Notches are those little cuts you put at the end of bends to let the metal fold flat without bunching up. CAD lets you add notch features automatically, so you don\u2019t have to draw them manually. For small parts, a 1\/8\u201d notch is standard, but for thicker material (like 10 gauge stainless), you might need a 3\/16\u201d notch. Again, our CAD adjusts the notch size based on material thickness if we set it up right. A few years back, we did a run of 100 electrical enclosures; if we\u2019d forgotten to add notches, each bend would have a bulge, and the enclosure would close lopsided. CAD added the notches, so every enclosure folded perfectly. No rework, no complaints from the client.<\/p>\n

Now, let\u2019s talk about export\u2014because even a great CAD design is useless if you export the wrong file. We use DXF or DWG files for cutting, but wait\u2014don\u2019t just export the entire 3D model as a DXF. You need to export the flat pattern only, as a 2D DXF, with all the bend lines, holes, and notches included. A lot of people export the 3D, which has faces that the laser cutter doesn\u2019t know how to process. Our CAD lets us select the flat pattern layer, export it as a 2D DXF, and check it in a viewer before sending to the shop. Last quarter, a client sent a DXF that had extra lines from the 3D model; our CAD\u2019s flat pattern viewer caught it, so we deleted the extra lines, and the laser cut the parts right on the first try. If we\u2019d just imported it directly, we\u2019d have had 100 parts with extra cuts, which would have been a disaster.<\/p>\n

Another tip: add manufacturing notes right in CAD. We put notes about material type, bend radius, finish (like powder coat or anodize), and any special requirements right on the drawing. CAD lets you attach annotations to the flat pattern, so the operator on the press brake or laser cutter can see them without looking for a separate document. For example, if a part needs a bending tolerance of \u00b10.010\u201d, we add that note in CAD, and it shows up on the drawing. This reduces miscommunication\u2014we\u2019ve had way fewer mistakes since we started doing this. We also use layers in CAD: one layer for the flat pattern, one for bend lines, one for holes, one for notches. That way, if we need to edit something, we only turn on the layer we need, not the whole file.<\/p>\n

Wait, let\u2019s not forget about tolerance. Sheet metal parts don\u2019t need the tight tolerances you\u2019d use for a machined part (like a CNC milled aluminum piece). For most parts, \u00b10.030\u201d is standard, but for things that need to fit together, like brackets that mount to a machine, we use \u00b10.015\u201d. Our CAD lets us set tolerance dimensions directly on the drawing, so the operator knows how accurate to be. If you set a tolerance too tight, you\u2019ll waste time and material\u2014for example, trying to bend a part to \u00b10.005\u201d is impossible with most press brakes, and you\u2019ll end up scrapping the part. CAD helps us pick the right tolerance based on the part\u2019s function, which saves money for both us and our clients.<\/p>\n

Let\u2019s circle back to being a sheet metal supplier\u2014we don\u2019t just design parts, we design parts that are easy to produce. CAD is our secret weapon here, because it lets us test the design before we cut metal. Some folks design on paper, then transfer to CAD, but we design directly in CAD. That way, we can simulate the bend\u2014we can see how the metal will fold, if there\u2019s going to be interference between parts, if the notch is the right size. We use the simulation tool in Fusion 360 to test bends before we even run the first batch. Last year, we had a client who wanted a custom shelf bracket; we simulated the bend in CAD, saw that the 90-degree bend would cause a crack in the 12 gauge CRS, so we adjusted the bend radius to 2x the material thickness, which fixed it. If we\u2019d skipped the simulation, we would have made 50 parts that cracked, and lost the client.<\/p>\n

Now, what about if you\u2019re a small shop or a beginner? You don\u2019t need a $10k CAD license. We started with Fusion 360 when it was free for hobbyists, and it\u2019s still our go-to for small runs. It has all the sheet metal-specific tools\u2014bend deduction, flat patterns, simulation, export to DXF. There\u2019s also SolidWorks Education if you\u2019re in school, but for commercial use, Fusion is perfect. The key is to learn the sheet metal tools, not just the basic sketching and extruding. Most CAD software has a \u201csheet metal workspace\u201d that\u2019s separate from the regular 3D workspace\u2014use that. That\u2019s where all the stuff you need for metal parts lives.<\/p>\n

Wait, let\u2019s address a common mistake a lot of new designers make: overcomplicating the design. You don\u2019t need fancy curves or weird angles if you don\u2019t have to. Sheet metal parts are cheaper and faster to make if they have simple bends, straight lines, and standard hole sizes. CAD makes it easy to keep things simple, because if you start adding non-standard features, it will flag the extra cost. For example, a custom bend radius costs more than a standard one, so CAD will note that, and we can tell the client upfront. That way, no surprises on the quote.<\/p>\n

So putting it all together, the steps we follow every time we design a sheet metal part in CAD are: 1) Lock in material type and thickness first, 2) Set up the sheet metal workspace with correct bend deduction and bend radii, 3) Build the 3D model associatively so the flat pattern updates automatically, 4) Check hole\/slot placement for edge distance and bend interference, 5) Add notches and bend lines, 6) Simulate the bend to test for issues, 7) Export only the 2D flat pattern as DXF\/DWG, with manufacturing notes and tolerances, 8) Double-check everything before sending to the shop.<\/p>\n

<\/p>\n

At the end of the day, good CAD design for sheet metal is all about connecting the design to the production process. As a supplier, our job isn\u2019t just to draw a part\u2014it\u2019s to make sure it can be made well, on time, and at a fair price. If you\u2019re working on a sheet metal project, and you need someone to help refine your design, turn it into a producible part, or handle full runs, we\u2019re here to help. We\u2019ve done everything from small custom brackets to large enclosures, and we use CAD every step of the way to keep mistakes low and quality high. Don\u2019t hesitate to reach out to discuss your project and get a no-hassle quote.<\/p>\n

\n

Worms<\/a> References<\/p>\n

    \n
  1. Fusion 360 Sheet Metal Design Documentation. Autodesk, Inc.<\/li>\n
  2. Sheet Metal Bend Deduction Guidelines. American Society of Mechanical Engineers (ASME)<\/li>\n
  3. Sheet Metal Design Best Practices for CNC Manufacturing. Society of Manufacturing Engineers (SME)<\/li>\n<\/ol>\n
    \n

    Kunshan SuperGoodRay Precision Technology Co., Ltd.<\/a>
    We are one of the most professional sheet metal parts manufacturers and suppliers in China, also accept customized order. Please rest assured to wholesale high quality sheet metal parts in stock here from our factory. If you have any enquiry about quotation, please feel free to email us.
    Address: No.268 Liushijing Road, Kunshan City, Suzhou, Jiangsu Province
    E-mail: huafeili@supergr.com.cn
    WebSite:     https:\/\/www.supergoodray.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    Hey guys, if you\u2019re in the sheet metal game, you know a good design can make … How to use CAD software to design sheet metal parts?<\/span>Read more<\/a><\/p>\n","protected":false},"author":394,"featured_media":3570,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3533],"class_list":["post-3570","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-sheet-metal-parts-4cf9-bd4a1c"],"_links":{"self":[{"href":"http:\/\/www.lightingbora.com\/blog\/wp-json\/wp\/v2\/posts\/3570","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.lightingbora.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.lightingbora.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.lightingbora.com\/blog\/wp-json\/wp\/v2\/users\/394"}],"replies":[{"embeddable":true,"href":"http:\/\/www.lightingbora.com\/blog\/wp-json\/wp\/v2\/comments?post=3570"}],"version-history":[{"count":0,"href":"http:\/\/www.lightingbora.com\/blog\/wp-json\/wp\/v2\/posts\/3570\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.lightingbora.com\/blog\/wp-json\/wp\/v2\/posts\/3570"}],"wp:attachment":[{"href":"http:\/\/www.lightingbora.com\/blog\/wp-json\/wp\/v2\/media?parent=3570"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.lightingbora.com\/blog\/wp-json\/wp\/v2\/categories?post=3570"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.lightingbora.com\/blog\/wp-json\/wp\/v2\/tags?post=3570"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}